Loading Postcards In Tray 6 (High Capacity Feeder B1-S) Or Trays 6 And 7 (High Capacity Feeder C1-Ds) - Fuji Xerox ApeosPort-VII C7788 Quick Reference

Important
When you load tab paper, place the paper with its tab side to the left.
4
Likewise, load the remaining paper and align the edges of the paper in the arrow direction
(1). Hold the short-side paper guide on the left side and slide it to the desired paper size of
tab paper (2).
Important
Do not load paper exceeding the maximum fill line. It might cause paper jams or device malfunctions.
If the number of sheets is 100 or less, the paper guides touch too tightly against the paper, causing the paper
to deform and resulting in paper jams.
Position the guides correctly to match the paper size. If the position of the guide is not correct, the paper may
not be fed properly, causing paper jams.
5
Push the tray in gently until it stops.
Loading Postcards in Tray 6 (High Capacity Feeder B1-S) or Trays 6 and
7 (High Capacity Feeder C1-DS)
The following describes the procedure for loading postcards in Tray 6 (High Capacity
Feeder B1-S (optional)) or Trays 6 and 7 (High Capacity Feeder C1-DS (optional)).
Note
Before loading paper in a tray, fan the paper well. Otherwise, paper jams may occur or multiple sheets may
be fed into the device at a time.
Reference
For information on how to load a postcard in Tray 5 (Bypass), refer to "Loading Paper in Tray 5" (P.67).
1
Pull out the tray towards you until it stops.
Important
While the device is processing a job, do not pull out the tray.
Loading Paper
79