Warm Weather Shutdown Configuration; Demand Priority Configuration Parameters - CleaverBrooks CFC Operation, Service & Parts Manual

Table 12. DHW Plate Heat Exchanger
Configuration Parameters. (Continued)
Parameter
Plate preheat on -0 °F to 180 °F (-17 °C to 82 °C)
hysteresis
Plate preheat off -0 °F to 180 °F (-17 °C to 82 °C)
hysteresis
Plate preheat detect -0 °F to 180 °F (-17 °C to 82 °C)
on threshold
Plate preheat detect -0 °F to 180 °F (-17 °C to 82 °C)
off threshold
Plate preheat ___hour ___min ___sec
minimum on time
Plate preheat delay ___hour ___min ___sec
after tap
Warm Weather Shutdown
Configuration
Table 13 displays Warm Weather Setpoint configuration
parameters.
Table 13. Warm Weather Setpoint
Configuration Parameters.
Parameter
Enable Enabled, disabled
Setpoint -40 °F to 266 °F (-40 °C to 130 °C)
Comment
Comment
Demand Priority Configuration
Parameters
Fig. 32 displays R7910A Hydronic Control Demand Priority
configuration options. Press the arrows to change the priority
order.
Fig. 32. Demand priority configuration.
17 CB-8462