Appendix C: Lockout And Hold Codes - CleaverBrooks CFC Operation, Service & Parts Manual

APPENDIX C: LOCKOUT AND HOLD
CODES
To support the recommended Troubleshooting, the Falcon has
an Alert File. Review the Alert history for possible trends that
may have been occurring prior to the actual Lockout.
Code
Safety Data Faults
1 Unconfigured safety data
2 Waiting for safety data verification
Internal Operation Errors
Table 49. Falcon Lockout and Hold Codes.
Description
Note Column: H= Hold message; L=Lockout message; H or L=
either Hold or Lockout depending on Parameter Configuration
Recommended Troubleshooting of Lockout Codes
1. New Device, complete device configuration and safety
verification.
2. If fault repeats, replace module.
1. Device in Configuration mode and safety parameters
need verification and a device needs reset to complete
verification.
2. Configuration ended without verification, re enter
configuration, verify safety parameters and reset device to
complete verification.
3. If fault repeats, replace module.
105
CB FALCON
NOTE
L
L
750-265