Optional Functions Available Through Remote Control Switch (Pc-P5H); Optional Functions Available Through Remote Control Switch (Pc-P5H) - Hitachi FSG1 Series Technical Catalogue

10.5. OPTIONAL FUNCTIONS AVAILABLE THROUGH REMOTE CONTROL SWITCH (PC-P5H)

Normal mode (When unit is not operating)
* Set at "Auto" in normal condition.
*
In the case that the remote control switch not available mode is set by central station, Mode
setting is not available
*
In the case that the the indoor units are set, at both "Standard" and "Cancel" setting, the
indication will be " - " in such case by pressing } ~ , all the indoor units can be set at " 0 " or " 1 "
Change to the function setting mode
Press the Î ( ) Ï ( ) and Ð ( ) Switch
simultaneously for more than 3 seconds.
1 Mode Setting
Press the } ~ Switch and select the operation mode
ºC
Operating Mode
Mode No. 1
Ð (
)
2 Cancellation of Adjusting Set Temperature for Heating Operation
ºC
Setting
Mode No. 2
Ð ( ) Push twice (option 3 is not used)
4 Simultaneous operation Setting (Total Heat Exchanger model only)
Press the } ~ Switch and select the operation mode
ºC
Setting
Mode No. 4
Ð (
)
5 Remote Control Main-Sub Setting
Press the } ~ Switch and select the operation mode
ºC
Setting
When this setting is changed, cut off the power supply of
Mode No. 5
all indoor units after returning the normal mode
AVAILABLE OPTIONAL FUNCTIONS
Press the Î ( ) Ï (
simultaneously
(see Chapter 11.2 for more information)
: Auto
: Fan
Temp. }
: Cool
: Dry
: Heat
Press the } ~ Switch and select the operation mode
: Standard
: Cancel
: A/C
: VENT I
Temp. }
: A/C + VENT I
: Main Remote Control Switch
: Sub Remote Control Switch
10
) and Ð ( )Switch
Temp. ~
Temp. ~
/25