Setting On/Off Time - Hitachi FSG1 Series Technical Catalogue

11.4.3. SETTING ON/OFF TIME

(<Example> "A" pattern, Friday, Setting 2, PM 1:00 (ON) / PM 5:00 (OFF)
In case that the remote control switch (PC-2H2 is used together, both setting of ON TIME and
OFF TIME are required for setting a, 2 and 3. (The setting of ON TIME (or OFF TIME) only is
not available).
In case that the central station (PSC-5S or PC-P1H) is used together, the setting of ON TIME
(or OFF TIME) only is available.
1. Depress the "SET/MONITOR" switch.
The control timer is changed to the setting mode, the "SET" indication is turned on and the
"J" mark is flickered.
The right figure shows the case of changing to the setting mode.
2. Select "A" or "B" pattern by depressing the "A/B" switch.
Refer to "B". Changing weekly Schedule pattern A or B for changing the pattern
3. Select the weekly day to set ON/OFF control by depressing the "DAY" switch
By depressing the "DAY" switch, the flickering "J" mark moves in order of
"Sun ® Mon ® ... ® Sat". Depressing the "DAY" switch after "Sat", all the "J" marks (from
"Sun" to "Sat") are flickered. In this case, the setting is the same for all days of a week.
Depressing the "DAY" switch once again, the flickering "J" mark returns to the position of
"Sun"
4. Depress the "ON/OFF TIME" switch.
The Timer is changed to the ON/OFF time setting mode and the "hour" indication of ON
TIME is flickered.
The right figure shows the case of changing to the ON/OFF time setting mode
5. Select the setting 1,2 or 3 by depressing the "
By depressing the " SELECT
The right figure shows the case of selecting the setting 2.
6. Set the "hour" indication of ON TIME by depressing the "HOUR/MINUTE } or ~"
switch.
After setting the "hour" indication, depress the "OK" switch and the "minute" indication of ON
TIME to be set is flickered.
The right figure shows the case of setting the hour "PM 1:--"
7. Set the "minute" indication of ON TIME by depressing the "HOUR/MINUTE } or ~"
switch.
After setting the "minute" indication, depress the "OK" switch and the "hour" indication of OFF
TIME to be set is flickered.
The right figure shows the case of setting the hour "PM 1:00".
8. Set the time of "OFF TIME" by the same procedure of setting the time of "ON TIME"
After setting the time of "OFF TIME", the flickering indication of "OFF TIME" is turned on and
the ON/OFF time setting mode is changed to the setting mode.
The right figure shows the case of setting the hour "PM 5:00".
9. Depress the "SET/MONITOR" switch
The "SET" indication is turned off and the control timer is changed to the monitor mode.
The right figure shows the case of indicating the setting condition of the present day.
I
Depressing the "CANCEL" switch when setting ON time (procedure 6) or OFF time
(procedure 8), the indication of ON TIME or OFF TIME is changed to "-:--". Depressing the
"OK" switch in this condition, the setting is canceled.
SELECT
" switch, the "hour" indication moves flickering.
REMOTE CONTROLLERS OPERATION
" switch.
11
/15
$
ATTENTION
$
ATTENTION