Standard Capable distance for receiving Signal of Air
Panel for Wireless Control.
(Example: In Case of 4-way Cassette Type)
Condition:
§ Typical office room
§ No electronic lamp within 1 m around receiver part of
Panel or Receiver Kit.
1 - Direction of receiver
Capable Range for Receiving Signal
1 - Direction of receiver
Capable Range for Receiving Signal
16.1 INSTALLATION OF REMOTE CONTROL SWITCH <PC-P1HE>
16.1.1 BEFORE INSTALLATION
Check the contents and the number of the accessories in
the packing.
Remote Control
2 screws
Switch, for
Ø4x16L
Operation Control
For fixing the
Holding Bracket
onto the wall
INSTALLATION OF OPTIONAL REMOTE CONTROLLER
Ceiling
Floor
Ceiling
Floor
1 Band
Ring Core
For fixing Cable
to Ring Core
Standard Capable distance for receiving Signal of Air
Panel for Wireless Control.
(View from Above)
(Example: In Case of 4-way Cassette Type)
Condition:
§ Operation of Wireless Remote Control Switch from
position; 2.6 m from ceiling level, 1 m from floor level.
§ Typical office room
§ No electronic lamp within 1 m around receiver part of
Panel or Receiver Kit.
16.1.2 INSTALLATION SPACE
In case of installing the controllers in vertical line, keep a
distance more than 10 mm between the controllers
vertically. If the distance is insufficient, the front cover of the
controller can not open wide enough
16
/3
More Than 10 mm