The WAN port of your Business Secure Router is set at half-duplex mode, as most
cable or DSL modems only support half-duplex mode. Make sure your modem is
in half-duplex mode. Your Business Secure Router supports full duplex mode on
the LAN side.
Table 6 Example of network properties for LAN servers with fixed IP addresses
Choose an IP address
Subnet mask
Gateway (or default route)
The third wizard screen varies according to the type of encapsulation that you
select in the second wizard screen.
192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.
255.255.255.0
192.168.1.1(Business Secure Router LAN IP)
Nortel Business Secure Router 222 Configuration — Basics
Chapter 3 Wizard setup 61