Table 3 Web Interface Configuration Options; Table 4 Configuration Checklist - Nortel Contivity 1100 Configuration Manual

• Manufacturer of device as well as firmware version, throughput, and any
special configuration requirements for any devices on the network. If you
assign static IP addresses to any of these devices, record them and a brief
explanation why they required static addresses.
• Include brief explanations with the layout.
• Domain architecture, including the existing domain hierarchy, names, and
addressing scheme.
• Trust relationships, including representations of transitive, one-way, and
two-way trust relationships.
• Mixed environments (HP-UX, AIX, Linux, Solaris, Windows NT/ 2000,
Macintosh).
• All protocols that exist within the network.
Table 3 shows the alternatives when first configuring your Nortel VPN Router.
Begin with either the Quick Start or the Guided Configuration. After you are
familiar with the Nortel VPN Router navigational menu and capabilities, select
Manage Switch.

Table 3 Web interface configuration options

Configuration type
Quick Start
Guided Config
Manage Switch
Table 4 provides a place for you to record the information that you need to
configure basic Nortel VPN Router parameters.

Table 4 Configuration checklist

window
>
System Identity
>
System Identity
Results
Configure and test a basic PPTP configuration
Structured Nortel VPN Router configuration and
management
Comprehensive Nortel VPN Router configuration and
management
Values required
Management IP address
Host name
Domain name
Nortel VPN Router Configuration — Basic Features
Chapter 2 Getting started 53
Your Values