Coupling Drive Motor Removal; Developer Drive Motor Assembly Removal - Lexmark Optra C710 Service Manual

5016-001

Coupling Drive Motor Removal

1. Remove the right side cover, refer to the
Removal" on page
2. Remove the motor mounting stay assembly, refer to the
Mounting Stay C Assembly Removal" on page
3. Remove the two (2) screws from the coupling drive motor.
4. Remove the coupling drive motor.

Developer Drive Motor Assembly Removal

1. Remove the right side cover, refer to the
Removal" on page
2. Remove the three (3) screws [A] from the developer drive
motor assembly.
3. Disconnect the developer drive cable [B].
4. Remove the developer drive motor assembly.
4-4.
4-4.
"Right Side Cover
"Motor
4-13.
"Right Side Cover
Repair Information
4-7