Chapter 2 — Connecting and Configuring the CN4
Activating the GSM/EDGE Phone
Making a Phone Call
Turning the Phone On and Off
Configuring the CN4 Parameters
46
You use a SIM card to activate the GSM/EDGE phone on the CN4.
You can purchase the SIM card from your network provider.
To activate the GSM/EDGE phone
Install the SIM card in the CN4. For help, see
•
miniSD or SIM Card" on page 35.
You may need to configure network settings for your provider. For
information, tap Start > Help and see the procedures in the Windows
Mobile online Help. Or, contact your network provider.
After you activate your phone, you are ready to start making phone
calls.
To make a phone call
1 Tap Start > Phone.
2 Tap the keys to enter the telephone number you want to call.
3 Tap the Talk button.
Use the iConnect utility to turn the phone on or off. For help, see
"Managing Network Connections With iConnect" on page 56.
You can configure many parameters on the CN4 such as the bar code
symbologies it decodes or the network settings. The values you set for
these parameters determine how the CN4 operates.
Operating parameters can be viewed and changed on the CN4 by
using the Intermec Settings application on the computer. There are
two ways to access Intermec Settings:
•
Remotely via Intermec SmartSystems Foundation. When you use
SmartSystems, you can remotely configure all your CN4
computers as well as other SmartSystems-enabled Intermec
"Installing a
CN4 Mobile Computer User's Manual