Activating The Gsm/Edge Phone; Making A Phone Call - Intermec CN3 Series User Manual

Chapter 3 — Configuring the Computer

Activating the GSM/EDGE Phone

Making a Phone Call

70
After you complete the activation process, the settings you enter
are permanently stored in the CDMA module. Changing the OS
or SSPB loads will not affect any of the settings or activation
parameters stored in the WAN modem.
To start the Activation Wizard
1 Tap Start > Phone from the Today screen.
2 In the Phone application, tap Menu > Activation Wizard
from the bottom of the screen.
You use a SIM card to activate the GSM/EDGE phone on the
CN3. You can purchase the SIM card from your network
provider. You insert the SIM card in the miniSD/SIM door in the
back of the CN3. For more information, please contact your
local Intermec representative.
To insert the SIM card
1 Press the Power button to suspend the CN3, and then remove
the battery pack from the back of the CN3.
2 Remove the two screws from the miniSD/SIM door.
3 Lift the door and insert the SIM card into the card slot with
the metal contacts facing outward.
4 Close the miniSD/SIM door and insert the two screws.
Tighten the screws to 1.5 in-lbs torque.
5 Replace the battery pack.
The CN3 cold boots and you can start using your phone.
After you activate your phone, you are ready to start making
phone calls.
To make a phone call
1 Tap Start > Phone.
2 Tap the keys to enter the telephone number you want to call.
3 Tap the Talk button.
CN3 Series Mobile Computer User's Manual