Star Micronics LaserPrinter 8 Operator's Manual page 109

1
2 3
4 5
parity:
odd
even
none*
stop bits:
1 stop bit*
2 stop bits
protocol:
xon/xofF+
DTR
ETX/ACK
Set initialvalues:
(ENTERat this point causesthe currentvaluesto be enteredinto the Initial
Settingversionin RAM. Whenthisisdone,themessageRAMLOADDONE
is displayed,followedby SETINITIALVALUES.) Loadsinitailvaluesinto
currentvalues.
Set powerup:
(ENTERat thispointcausesthecurrentvaluestobeenteredinto thePower-Up
SettingversioninNVRAM. Whenthisis done,themessageNVRAMLOAD
DONEis displayed, f ollowedby POWERSET-UP.)LoadsNV RAMsettings
intocurrentsettings.
Loadfactoryset:
(ENTERat thispointcausestheFactorySettingstoredin ROM to be entered
into the currentSettingmemory,replacingtheprevioussetting. Whenthis is
done,the messageLOADFROMROMOK is displayed,followedby LOAD
FACTORYSET.)Loadsfactorysettingsintocurrentsettings.
Specific Emulaflons
This chapterwillprovidespecificinformationfor emulatingeach of the four
printers,includingpageorientation; f ontattributes, s uchaspitchandtypeface.
It also includesactionsto controlthe printerthroughthe application,such as
carriagereturnand line spacing.
Eachof thesecharacteristics and actionsis initiatedby a commandset.Where
thereare alternativechoices,the values for eachare also given.
103