I Power Supply Connections - Icom IC-910H Instruction Manual

I Power supply connections

Use an optional DC power supply with a 25 A capacity
and above when operating the transceiver with AC
power. Refer to the diagrams below.
CONNECTING A DC POWER SUPPLY
A DC power supply
AC outlet
13.8 V DC 25 A
AC cable
CONNECTING A VEHICLE BATTERY
24V
Grommet
Supplied DC
power cable
Black Red
_ +
NEVER connect
to
a 24 V battery.
IC-910H
From The N3UJJ.COM Document Library From The N3UJJ.COM Document Library
INSTALLATION AND CONNECTIONS
CAUTION:
Before connecting the DC power
cable, check the following important items. Make
sure:
• The [POWER] switch is OFF.
• Output voltage of the power source is 12–15 V
when you use a non-Icom power supply.
• DC power cable polarity is correct.
: positive + terminal
Red
: negative _ terminal
Black
IC-910H
Ciga
+ red
_ black
12 V
battery
Supplied
DC power cable
3
NEVER use
the cig-
arette lighter socket as
a power source.
NOTE: Use terminals for
the cable connections.
Crimp
Solder
17