I Nr Set Mode; I Swp Set Mode - Icom IC-910H Instruction Manual

Vhf/uhf all mode transceiver

Hide thumbs Also See for IC-910H:

Table of Contents

I NR set mode

Noise reduction level for 144 MHz

Adjust the noise reduction level to the desired level

within 0–15 for the 144 MHz band operation.

Adjust it to the level that noise signals are reduced,

and received audio has no distortion.

This item is displayed only when the optional UT-106

is installed.

Noise reduction level for 430(440) MHz

Adjust the noise reduction level to the desired level

within 0–15 for the 430(440) MHz band operation.

Adjust it to the level that noise signals are reduced,

and received audio has no distortion.

This item is displayed only when the optional UT-106

is installed.

Noise reduction level for 1200 MHz

Adjust the noise reduction level to the desired level

within 0–15 for the 1200 MHz band operation.

Adjust it to the level that noise signals are reduced,

and received audio has no distortion.

This item is displayed only when the optional UT-106

is installed.

Sweeping interval

Select the sweeping interval for the simple band

scope function from 3, 5 and 10 sec.

From The N3UJJ.COM Document Library

SET MODE

SWP

Table of Contents

Show Quick Links

Table of Contents