I General Set Mode - Icom IC-910H Instruction Manual

10
SET MODE

I General set mode

Display backlight brightness
Adjust backlight brightness for the function display to
the desired level within 0 (dark) to 100 (bright) range.
Beep tone
Adjust key touch beep output level to the desired level
within 0 (no output) to 100 (max. output) range.
RF/SQL control assignment
Assign [RF/SQL] control function from rF/SqL, Auto
and SqL.
• rF/SqL : RF gain and squelch controls are combined
for SSB/CW mode. Acts as squelch control
for FM mode.
• Auto : Acts as either an RF gain or squelch control
depending on operating mode.
• SqL : Acts as squelch control for all modes. RF
gain is set to maximum level in this setting.
Peak hold function
Turn the S-meter peak hold function ON or OFF.
The peak level is indicated for approx. 0.5 sec. when
this function is activated.
56
From The N3UJJ.COM Document Library From The N3UJJ.COM Document Library