Installation Notes - Icom IC-910H Instruction Manual

We Icom Inc. Japan
1-1-32, Kamiminami, Hirano-ku
Osaka 547-0003, Japan
Declare on our sole responsibility that this equipment complies the
essential requirements of the Radio and Telecommunications Terminal
Equipment Directive, 1999/5/EC, and that any applicable Essential Test
Suite measurements have been performed.
Kind of equipment:
Type-designation:
Version (where applicable):
This compliance is based on conformity according to Annex III of the
directive 1999/5/EC using the following harmonised standards:
i) Article 3.1a
ii) Article 3.1b
iii) Article 3.2
iv)
v)
Version and frequency coverage
Version 144 MHz
Europe (#02) 144.0–146.0
Sweden (#05) 144.0–146.0
Italy (#08) 144.0–146.0
• About AG-25, AG-35 and AG-1200 preamplifiers
The use of IC-910H (#02, #05 and #08) in combination with AG-25, AG-35
and/or AG-1200 preamplifiers do not comply with the European harmonised
standard regulations. Please do not use the IC-910H
(AG-25, AG-35 and/or AG-1200) intended for the US, Asian, Oceanian and
African markets.
VHF/UHF ALL MODE TRANSCEIVER
iC-910h
EN 60950 + A11
EN 301489-1 and EN 301489-15 (or ETS 300 684)
EN 301 783-2
430 MHz
430.0–440.0
432.0–438.0
430.0–434.0
435.0–438.0
with these preamplifiers
From The N3UJJ.COM Document Library From The N3UJJ.COM Document Library
DECLARATION
OF CONFORMITY
Düsseldorf 21th Feb. 2001
Place and date of issue
Icom (Europe) GmbH
Himmelgeister straße 100
D-40225 Düsseldorf
Authorized representative name
Icom (Europe) GmbH
T. Aoki
General Manager
Signature
1200 MHz*
1240.0–1300.0
1240.0–1300.0
1240.0–1245.0
1270.0–1298.0
* Optional UX-910

INSTALLATION NOTES

16
83