Buell 2007 ULYSSES Service Manual page 419

HOME
Code 23/32 Test (Part 2 of 2)
4-70 2007 Buell Ulysses: Fuel System
Continued from Code 23/32 Test (Part 1 of
Check for 12 volts at Terminal 87 of the ignition
relay. Is voltage present?
YES
Ignition relay is OK. Measure resistance
between Terminal 87 of the ignition relay and
Terminal 2 (W/Y for Code 23 or GN/GY for
Code 32) wire at injector connector.
Is resistance less than 0.5 ohm?
YES
With DVOM still
attached, perform 4.7
WIGGLE TEST to locate
intermittents. Repair
as necessary.
Clear codes and confirm proper operation with no
check engine lamp. Codes can be cleared using
DIGITAL TECHNICIAN (Part No. HD-44750).
2).
NO
Check for multiple codes.
See 4.4 CHECKING FOR
TROUBLE CODES.
NO
Find and repair
connection or
open wire.