Fuel Cap Retaining Ring - Buell 2007 ULYSSES Service Manual

HOME

FUEL CAP RETAINING RING

REMOVAL
NOTE
The fuel tank must be drained to perform this service.
1. Drain fuel tank. See DRAINING FUEL TANK
FUEL PUMP.
2. Remove fuel filler cap.
3. See Figure 4-96. Remove fasteners (4) securing fuel cap
retaining ring (3) to fuel filler neck (1).
4. Remove fuel cap retaining ring and o-ring (2). Discard o-
ring.
INSTALLATION
1. Coat new o-ring (2) with thin film of clean engine oil.
2. Place o-ring into groove in underside of fuel cap retaining
ring (3).
NOTE
Be sure o-ring remains in groove of fuel cap retaining ring
during installation.
3. Insert fuel cap retaining ring into fuel filler neck.
4. Install fasteners (4). Tighten to 62-71 in-lbs (7-8 Nm).
5. Install fuel filler cap.
4-116 2007 Buell Ulysses: Fuel System
b1039x4x
under 4.39
1. Fuel filler neck
2. O-ring
3. Fuel cap retaining ring
4. Fastener (5)
Figure 4-96. Fuel Cap Retaining Ring
4
3
2
1
4.41