Buell 2007 ULYSSES Service Manual page 264

HOME
29. See Figure 3-20. Disconnect clutch cable.
a. Remove wire form retainer and lower retaining
clamp.
b. Slide clutch cable adjuster boot (2) up to access
clutch adjuster.
c. Loosen clutch adjuster to release tension from hand
lever.
d. Remove clutch cable ferrule from hand lever.
30. See Figure 3-21. Remove two fasteners (2) and remove
sidestand assembly.
31. Support engine with wide scissors jack.
1. Sidestand assembly
2. Bracket fasteners (2)
Figure 3-21. Sidestand Assembly (Extended)
2007 Buell Ulysses: Engine
2
1
b0946c2x
3-25