Buell 2007 ULYSSES Service Manual page 344

HOME
4. See Figure 3-152. Attach left crankcase half to engine
stand.
5. Install flywheel assembly using CRANKSHAFT GUIDE
(Part No. HD-42326).
6. See Figure 3-153. Install pinion shaft bearing.
a. Lubricate pinion shaft bearing with engine oil.
b. Slip bearing on pinion shaft.
c. Install new retaining ring in groove of pinion shaft
bearing inner race.
8792
1
8789
2
8762
1. Shoulder for bearing to press against
2. Crankcase bearing remover/installer tool
(Part No. B-45655, HD-42720-2 and HD-46663)
3. Bearing retaining ring
Figure 3-151. Sprocket Shaft Bearing Installation
Figure 3-152. Installing Flywheel Assembly with
CRANKSHAFT GUIDE (Part No. HD-42326)
a0120x3x
3
Figure 3-153. Pinion Shaft Bearing
2007 Buell Ulysses: Engine 3-105
8622