Buell 2007 ULYSSES Service Manual page 119

HOME
ADJUST TIMING
1. See Figure 1-52. Remove timing plate cover.
a. Drill rivets holding the timing plate cover.
b. Using a hook, remove timing plate cover.
c. Loosen sensor assembly fasteners.
2. See Figure 1-54. If timing is advanced (mark appears on
left side of window) rotate timing plate counterclockwise.
3. Check timing. See CHECKING STATIC
4. See Figure 1-55. If timing is retarded (mark appears on
right side of window) rotate timing plate clockwise.
5. Tighten sensor assembly fasteners to 15-30 in-lbs (1.7-
3.4 Nm).
6. Recheck timing.
12136a
Figure 1-52. Timer Cover
8391a
Figure 1-53. Cam Position Sensor
1-46 2007 Buell Uylsses: Maintenance
b1247x1x
TIMING.
b1248x1x
Figure 1-54. Advanced Timing
Figure 1-55. Retard Timing