Changing The Paper Size Used Fora Print Job - Sharp MX-C382SC Operation Manual

CHANGING THE PAPER SIZE USED FOR A PRINT JOB
Paper Empty Paper Empty
1 Check detail on the job.
Print Job Scan to
Job Queue Sets / Progress
1 020 / 001
Copy
2 Computer01 020 / 000
3 Copy 002 / 000
4 1234567890 001 / 000
Detail
Computer01 020 / 000
Colour / B/W: Full Colour
A5
Paper: Paper Select
Plain
(3)
2 Change the paper sized for the job.
Paper Select
Paper Tray
1. A4
2. A5
3. A4
4. A4
When the size of paper specified for a print job is not loaded in any of the
machine's paper trays, follow the steps below to change the paper size.
Fax Job
Internet Fax
Status
Spool
Copying
Job Queue
(1)
Paper Empty Complete
1
1
Waiting
Waiting
(2)
Detail
Priority
Stop/Delete
OK
Paper Empty
Output:
Special
Modes:
OK
Bypass Tray
Plain
Plain
Plain
Plain
Plain
Press the [JOB STATUS] key on the
operation panel to display the job status
screen.
(1) Select the job whose status is
[Paper Empty].
(2) Touch the [Detail] key.
To delete the job, you can press the
[Stop/Delete] key.
(3) Check the paper size specified
for the job in the detail screen,
and touch the [Paper Select]
key.
Select the paper size on which you wish to print the job
from the set paper sizes.
To avoid cutting off part of the image, select a paper size
that is larger than the paper size specified for the job.
8-8
TROUBLESHOOTING
Contents