Using The Resend Function - Sharp MX-C382SC Operation Manual

USING THE RESEND FUNCTION

The destinations of the most recent 8 transmissions by Scan to E-mail, Internet fax (including Direct SMTP addresses)
and/or fax are stored. One of these can be selected to resend to that destination.
Ready to send. Ready to send.
Original exit place: Upper Exit
Scan Internet Fax
Address Book
Original
Address Entry Exposure
1
Send Settings Resolution
Address Review File Format
Colour Mode
File
Special Modes
Quick File
Preview
Resend
No.01 AAA AAA
No.03 CCC CCC
2
No.05 EEE EEE
GGG GGG
No.07
• When the [Resend] key is touched and a destination selected, the mode of the selected destination is automatically
selected.
• The following types of addresses are not stored for resending.
- A one-touch key in which multiple destinations are stored (group key).
- Scan to FTP, Scan to Desktop, and Scan to Network Folder addresses.
- Broadcasting destinations
- Addresses used only for BCC delivery
- Destinations transmitted to using a program
System Settings (Administrator): Disable [Resend] on Fax/Image Send Mode
This prohibits use of the resend function. When this setting is enabled, the [Resend] key cannot be used in the base screen
of image send mode.
Resend
Fax USB Mem. Scan PC Scan
Scan: Send: Auto
A4
Auto Text
200X200dpi
PDF PDF
Auto/Greyscale Mono2
Cancel
No.02 BBB BBB
No.04 DDD DDD
No.06 FFF FFF
HHH HHH
No.08
Touch the [Resend] key.
Touch the key of the desired address.
The last 8 addresses used for transmission are displayed.
5-27
SCANNER/INTERNET FAX
Contents