Cleaning The Main Charger Of The Photoconductive Drum - Sharp MX-C382SC Operation Manual

CLEANING THE MAIN CHARGER OF THE
PHOTOCONDUCTIVE DRUM
If black lines or coloured lines appear even after you have cleaned the document glass and automatic document feeder,
use the charger cleaner to clean the main charger.
1
2
3
(1)
4
(A)
Press the [POWER] key (
operation panel to turn off the panel
power, and then switch the main power
switch to the off position.
Open the front cover and remove the toner
collection container.
☞
REPLACING THE TONER COLLECTION CONTAINER
(page 1-50)
Release the lock levers and open the
main charger cover.
☞
REPLACING THE DEVELOPER CARTRIDGE
Remove the charger cleaner.
(1) Flip down the charger cleaner lock (A) in the
direction of the arrow, and lift the left end of
(2)
the charger cleaner.
(2) Move the charger cleaner to the left and pull
it out.
1-63
BEFORE USING THE MACHINE
) on the
Contents
(page 1-53)