Colour Copy Modes - Sharp MX-C382SC Operation Manual

COLOUR COPY MODES

The colour mode of the [COLOUR START] key is normally set to [Full Colour] so that copying takes place in full colour
mode when the [COLOUR START] key is pressed. If colour originals are mixed together with black & white originals, set
the colour mode to [Auto] to have the colour mode change appropriately for each original.
Touch the [Colour Mode] key in the base screen to open the following screen.
Touch the key of the desired colour mode and then touch the [OK] key.
Full Colour
Auto
Single Colour
2 Colour
Colour Mode
Full Colour Single Colour
Auto
The original is copied in full colour.
The machine automatically detects whether each original is colour or black & white and
switches the mode appropriately (full colour for a colour original or black & white for a black &
white original).
The original is copied in the selected colour only.
All colours in the original are changed to the selected colour, which can be selected from red,
green, blue, cyan, magenta, or yellow.
Only the red areas of the original are changed to the selected colour; colours other than red
are copied in black. This lets you make copies that are more expressive than black and white
copies.
Red, green, blue, cyan, magenta, or yellow can be selected.
2-22
OK
2 Colour
COPIER
Contents