Cleaning The Bypass Tray Rollers - Sharp MX-C382SC Operation Manual

Hide thumbs Also See for MX-C382SC:
Table of Contents

Advertisement

CLEANING THE BYPASS TRAY ROLLERS

If you find that paper fed from the bypass tray misfeeds or is soiled by the roller, remove and clean the roller. If misfeeds
or soiling continue to occur, replace the roller.
Before starting, remove the paper from the bypass tray.
1
2
Marks
3
Caution
When cleaning the rollers, be careful not to injure your hands.
Do not touch the surface of the roller if your hands are dirty.
• When you replace roller, go to the next step.
• If the dirt is difficult to remove, moisten the cloth with a small amount of water or neutral detergent, and then wipe
with a clean, dry cloth until no moisture remains.
4
(1)
(2)
1-66
BEFORE USING THE MACHINE
Press the [POWER] key (
operation panel to turn off the panel
power, and then switch the main power
switch to the off position.
Remove the roller cover from the bypass
tray.
Place your fingers behind the
pull straight toward you.
To clean the rollers, wipe each roller
with a clean cloth.
Attach the roller cover on the bypass
tray.
(1) Tilt the front of the cover slightly to attach
it.
(2) Press the cover onto the bypass tray so that
it locks into place.
) on the
marks on the roller cover and
Contents

Advertisement

Table of Contents
loading

Table of Contents