Sharp MX-C382SC Operation Manual page 564

Scan/Special Modes Scan/Special Modes
Program Program
4
Card Shot Card Shot
Slow Scan Slow Scan
Mode Mode
Quick File Quick File
Press the [COLOUR START] key or the [BLACK & WHITE START] key to scan the
first set of originals.
5
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key (
Insert the next set of originals and press the [COLOUR START] key or the
[BLACK & WHITE START] key.
Press the [START] key pressed in step 5.
6
Repeat until all originals have been scanned.
To cancel scanning...
Press the [STOP] key (
Place next original.
Press [Start].
When finished, press [Read-End].
7
• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
• The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original
page scanned.
If the memory becomes full during scanning, a message will appear and the transmission will be cancelled.
To cancel the job build function....
Touch the [Job Build] key in the screen of step 4 so that it is not highlighted.
(1) (2)
OK OK
Erase Erase Timer Timer
1 1
Job Mixed Size Mixed Size
2 2
Build Original Original
Original Original
File File
Count Count
Suppress Suppress Own Name Drop Out
Background Background
Select Colour
) to cancel the operation.
) to cancel the operation. All scanned data will be cleared.
(Pg.No.x)
Configure Read-End
Select job build mode.
(1) Touch the [Job Build] key so that it is
highlighted.
(2) Touch the [OK] key.
Touch the [Read-End] key.
5-82
SCANNER/INTERNET FAX
Contents