Sharp MX-C382SC Operation Manual page 518

Scan Internet Fax
Original
File Name
Exposure
Resolution
File Format
Colour Mode
Special Modes
Preview
3
• When scanning to USB memory, there is no need to specify the destination.
• If a destination of another mode has been previously specified, a message will appear when you change to USB
memory mode indicating that the destination setting will be cleared. Touch the [OK] key in the message screen and
go to the next step.
• The current settings for [Original], [Exposure], [Resolution], [File Format], and [Colour Mode] are indicated at the
right of each key. To change a setting, touch the appropriate key.
☞
AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original)
THE ORIGINAL SCAN SIZE AND SEND SIZE
IMAGE TYPE
(page 5-63),
(1)
USB Mem. Scan/Original
Scan Size
A4
2-Sided 2-Sided
Booklet Tablet
4
• The placement orientation of the original is initially set to
left, this step is not necessary.
• The original size set in the system settings appears as the original size.
(2) (1)
Fax USB Mem. Scan PC Scan
Scan: Send: Auto
A4
Auto Text
200X200dpi
PDF PDF
Auto/Greyscale Mono2
(page 5-60), CHANGING THE RESOLUTION
CHANGING THE COLOUR MODE
(2) (3)
OK
Send Size
100%
Auto
Image Orientation
Switch to USB memory mode and
display the image settings screen.
(1) Touch the [USB Mem. Scan] tab
If the [USB Mem. Scan] tab does not appear, touch the
tab to move the screen.
(2) Touch the [Original] key.
(page 5-54), CHANGING THE EXPOSURE AND ORIGINAL
(page 5-62),
(page 5-67), SPECIAL MODES
Check the original scan size and
placement orientation.
To make sure that the original is scanned in the correct
orientation (the orientation in which the top edge of the original
appears at the top of the display), check the size and
orientation of the original placed in step 1.
(1) Check the scan size.
Check if the size of the placed original is displayed. If the
displayed size is different from the size of the placed
original, set the original size.
☞
SPECIFYING THE ORIGINAL SCAN SIZE AND
SEND SIZE
(2) Touch the appropriate orientation key.
If the top edge of the original is up, touch the
the top edge of the original is to the left, touch the
key.
(3) Touch the [OK] key.
You will return to the screen of step 3.
. If you placed the original with the top edge to the
5-36
SCANNER/INTERNET FAX
(page 5-53), SPECIFYING
CHANGING THE FILE FORMAT
(page 5-70)
(page 5-54)
Contents
key. If