Sharp MX-C382SC Operation Manual page 538

Specifying the original scan size (by numerical values)
When scanning a non-standard size original such as a card, follow these steps to specify the original size.
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Original] key.
The original size set in the system settings appears to the right of the [Original] key.
☞
IMAGE SETTINGS
Scan/Original
Scan Size
A4
2
2-Sided 2-Sided
Booklet Tablet
Scan/Original
Original Exit
Upper Exit Upper Exit
Place
Original Size
5½x8½ A5 216x330
B5 216x340
3 A4
8½x13 216x343
Size Input
If the [Card Size] key is touched, "X86 Y54" is set in [Size Input].
(page 5-52)
OK
100% Send Size
Auto
Image Orientation
OK
Heavy Exit
16K
AB
Check Size
Inch
Long Size
Card Size
5-56
SCANNER/INTERNET FAX
Touch the [Scan Size] key.
Touch the [Size Input] key.
Contents