Sharp MX-C382SC Operation Manual page 170

(1)
Original
Original Exit
Upper Exit
Place
A5 216x330
B5 216x340
3
A4 216x343
Size Input
When placing an AB (inch) size or non-standard size original, specify the original size as explained in
SIZES" (page 2-30).
Colour Mode
Full Colour
Exposure
Auto
4
Copy Ratio Original
100%
A4
Upper Exit
For some original size settings, the same size of paper as the original may not be automatically selected. In this case,
manually change the paper size.
5
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Even if a colour mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key is
6
pressed.
To cancel scanning of the original and copying...
Press the [STOP] key (
(2) (3)
OK
Heavy Exit
16K
AB
Check Size
Inch
Card Size
Custom Size None
Special Modes
2-Sided Copy
Plain
A4
Output
A4
A5 File
A4
A4
Quick File
Paper Select
Auto
A4
Preview
Plain
7
Special Modes
2-Sided Copy
Plain
A4
) and then enter the correct number.
).
2-12
Specify the original size.
(1) Touch the original output destination.
(2) Touch the appropriate original size key.
(3) Touch the [OK] key.
Check the paper to be used and the
colour mode.
Make sure that the desired paper (tray) and colour mode are
selected.
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS (page 2-10)
• To change the colour mode, touch the [Colour Mode] key.
☞
COLOUR COPY MODES
Set the number of copies (number of
sets) with the numeric keys.
COPIER
"ORIGINAL
(page 2-22)
Contents