Sharp MX-C382SC Operation Manual page 125

3
• If the machine is not found, make sure that the machine is powered on and that the machine is connected to the
network, and then click the [Re-search] button.
• You can also click the [Specify condition] button and search for the machine by entering the machine's name (host
name) or IP address.
☞
Start Guide "Checking the IP address of the machine"
A confirmation window appears. Check the contents and then click the [Next]
4
button.
5
When the PC-Fax driver is being installed, this screen does not appear. Go to the next step.
When you are asked whether or not you want the printer to be your default
printer, make a selection and click the [Next] button.
If you are installing multiple drivers, select the printer driver to be used as the default printer.
If you do not wish to set one of the printer drivers as the default printer, select [No].
6
If you clicked the [Custom installation] button in step 2, the following windows will appear.
• Printer name window
If you wish to change the printer name, enter the desired name and click the [Next] button.
• Window confirming installation of the display fonts
To install the display fonts, select [Yes] and click the [Next] button.
• When the PC-Fax driver is being installed, this screen does not appear. Go to the next step.
BEFORE USING THE MACHINE
Printers connected to the network are
detected. Select the machine and click
the [Next] button.
When the printer driver selection
window appears, select the printer driver
to be installed and click the [Next]
button.
Click the checkbox of the printer driver to be installed so that a
checkmark ( ) appears.
1-83
Contents