Sharp MX-C382SC Operation Manual page 215

Select the special modes.
(1) Touch the [Special Modes] key.
3
(2) Touch the [Card Shot] key.
☞
Special modes menu (1st screen)
Special Modes
Card Shot
X
Y
4
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
5
To cancel scanning...
Press the [STOP] key (
When placing the original on the document glass, follow the procedure
below.
Turn the card over and press the [COLOUR START] key or the [BLACK & WHITE
START] key to scan the reverse side of the card.
Use the same [START] key that you used for the front side of the card.
6
To cancel scanning...
Press the [STOP] key (
(page 2-41)
(1) (C) (2)
OK
Cancel OK
Fit to
(A)
Send Size
86
(25~210)
mm
(B)
Size Reset
54
(25~210)
mm
Image Orientation
).
).
Select card shot settings.
(1) Enter the original size.
With the [X] key highlighted, enter the X (horizontal)
dimension of the original with the
Touch the [Y] key and enter the Y (vertical) dimension of
the original with the
You can also directly touch a numeric value display key to
change a number with the numeric keys.
(A) To enlarge or reduce the images to fit the paper
based on the entered original size, touch the [Fit to
Page] key.
(B) The [Size Reset] key can be pressed to return the
horizontal and vertical dimensions to the values set in
"Card Shot Settings" in the system settings
(administrator).
(C) Select the image orientation of the original card from
"Image Orientation".
(2) Touch the [OK] key.
You will return to the base screen of copy mode. Make
sure that the entered dimensions appear in the [Original]
key.
2-57
COPIER
keys.
keys.
Contents