Sharp MX-C382SC Operation Manual page 153

Printing using the IPP function
The machine can print using the IPP function. When the machine is in a remote location, this function can be used in
place of the fax function to print a higher than a fax. If you wish to use the IPP function, follow these steps to select the
PPD file when configuring the printer driver (step 14 on page 1-108).
v10.4.11, v10.5 - 10.5.8, v10.6 - 10.6.2
v10.2.8, v10.3.9
BEFORE USING THE MACHINE
(1) Click the [IP Printer] icon.
If you are using Mac OS X v10.5 to 10.5.8 or v10.6 -
10.6.2, click the [IP] icon.
(1)
(2) Select [Internet Printing Protocol] in
"Protocol". Enter the address of the
(2)
machine (IP address or domain name) and
the queue name.
Enter "ipp" in "Queue".
(3) Select [Sharp] in "Print Using" and click the
PPD file of your model.
(3)
If you are using Mac OS X v 10.5 to 10.5.8 or v10.6 -
10.6.2, select [Select a driver to use] (or [Select Printer
(4)
Software]) from "Print Using" and click the PPD file for
your model.
(4) Click the [Add] button.
The "Installable Options" screen will appear. Make sure
that the settings are correct and click the [Continue]
button.
☞
Start Guide "Checking the IP address of the machine"
(1) Select [IP Printing].
(1)
(2) Select [Internet Printing Protocol] in
"Printer Type". Enter the address of the
(2)
machine (IP address or domain name) and
the "Queue Name".
• If you are using Mac OS X v10.2.8, enter the address of
the machine (IP address or domain name) in "Printer's
Address".
• Enter "ipp" in "Queue Name".
(3)
(3) Select [Sharp] in "Printer Model" and click
the PPD file of your model.
(4)
(4) Click the [Add] button.
☞
Start Guide "Checking the IP address of the machine"
1-111
Contents