Sharp MX-C382SC Operation Manual page 430

Fax/Special Modes
Card Shot
X
Y
4
Y
X
• You can also touch the
• The send size is automatically selected based on the original size you entered.
• After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the
send size. In this case, press the [Scan Size] key to display the screen for this procedure. For the procedure for
setting the send size, see
Press the [BLACK & WHITE START] key.
5
To cancel scanning...
Press the [STOP] key (
When placing the original on the document glass, follow the procedure
below.
Turn the card over so that the back is face down, and press the [BLACK &
WHITE START] key to scan the back of the card.
6
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key (
(1) (C) (2)
OK
Cancel OK
Fit to
(A)
Send Size
86
(25~210)
mm
(B)
Size Reset
54
(25~210)
mm
Image Orientation
X
keys to change the number.
"Specifying the send size of the
).
).
Specify the original size.
(1) Enter the original size.
• Touch the X (width) numeric value display key and
enter the width.
• Touch the Y (height) numeric value display key and
enter the height.
(A) To automatically enlarge or reduce the image size to
the send size, touch the [Fit to Send Size] key. Do not
touch this key if you wish to scan the original at the
original size that you entered.
(B) To return the original size to the default size, touch
the [Size Reset] key.
(C) Select the image orientation of the original from
"Image Orientation".
(2) Touch the [OK] key.
Y
original" (page 4-51).
4-77
FACSIMILE
Contents