Installing The Printer Status Monitor - Sharp MX-C382SC Operation Manual

INSTALLING THE PRINTER STATUS MONITOR

Printer Status Monitor is a printer utility that allows general users to check the current status of the machine on their
computer screen, such as whether or not the machine is ready to print. The Printer Status Monitor shows error
information such as paper misfeeds, printer configuration information (whether or not a finisher is installed, etc.) as an
image, the paper sizes that can be used, and the amount of paper remaining.
The Printer Status Monitor cannot be used in the following situations:
• When the machine is connected by a USB cable.
• When printing to the machine using the IPP function.
When the software selection screen appears in step 6 of
ALL SOFTWARE)" (page 1-80), perform the steps below.
1
Follow the on-screen instructions.
2
When the installation completed screen appears, click the [Finish] button.
3
To have the Printer Status Monitor start automatically when your computer is started, select the [Add this program to your
Startup folder] checkbox
Click the [Close] button in the window of step 1.
4
After the installation, a message prompting you to restart your computer may appear. If this message appears, click
the [Yes] button to restart your computer.
This completes the installation.
For the procedures for using the Printer Status Monitor, see the Help file. Follow these steps to view the Help file:
Click the Windows [start] button, select [All Programs] ([Programs] in Windows 2000), select [SHARP Printer Status
Monitor] and then select [Help].
"OPENING THE SOFTWARE SELECTION SCREEN (FOR
and click the [Finish] button.
1-99
BEFORE USING THE MACHINE
Click the [Printer Status Monitor] button.
Contents