Printing On Envelopes - Sharp MX-C382SC Operation Manual

PRINTING ON ENVELOPES

The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an envelope
from the printer driver properties screen is described below.
For the types of paper that can be used in the bypass tray, see
"BEFORE USING THE MACHINE". For the procedure for loading paper in the bypass tray, see
THE BYPASS TRAY" (page 1-33) in "1. BEFORE USING THE MACHINE".
Select the envelope size in the appropriate settings of the application ("Page Settings" in many applications) and then
perform the following steps.
(1) (2)
• It is recommended that you do a test print to check the print result before using an envelope.
• In the case of media that can only be loaded in a certain orientation such as an envelope, you can rotate the image 180
degrees if needed. For more information, see
(page 3-38).
• For more information on "Paper Selection", see
"IMPORTANT POINTS ABOUT
(1) Click the [Paper] tab.
(3)
(2) Select the envelope size from the "Paper
(3) Select [Bypass Tray] from the "Paper
(4) Select [Envelope] from the "Paper Type"
(4)
"ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180
"SELECTING THE
3-7
Size" menu.
Source" menu of "Paper Selection".
menu.
Set the paper type of the bypass tray to [Envelope] and
make sure the envelope is loaded in the bypass tray.
PAPER" (page 3-6).
PRINTER
PAPER" (page 1-27) in
"LOADING PAPER IN
degrees)"
Contents