Copying Both Sides Of A Card On One Sheet Of Paper (Card Shot) - Sharp MX-C382SC Operation Manual

COPYING BOTH SIDES OF A CARD ON ONE
SHEET OF PAPER (Card Shot)
When copying a card, this function allows you to copy the front and reverse sides together onto a single sheet of paper.
This function is convenient for making copies for identification purposes and helps save paper.
Colour Mode
Full Colour
Exposure
Auto
1
Copy Ratio
Original
100%
Upper Exit
Place the original.
Place the original face up in the document feeder tray, or
face down on the document glass.
• Place the original in the automatic document feeder.
☞
PLACING ORIGINALS IN THE AUTOMATIC
DOCUMENT FEEDER
• Set the original on the document glass ➞ Set at the
relative position in the right table.
2
Place the original as shown below when using the
document feeder tray.
Originals
Front
Back
Special Modes
2-Sided Copy
Plain
A4
Output
A4
1.
2. A5 File
A4
3.
4. A4
Quick File
Paper Select
Auto
A4
A4
Preview
Plain
(page 1-36)
A
Copies
Example of an A4 (8-1/2" x
11") size landscape copy
Select the paper to be used for card
shot.
Select the paper as explained in
Originals
A
Front page
Back page B
2-56
COPIER
"PAPER TRAYS" (page 2-10).
Results
A B
Contents