Table of Contents
Advertisement
5.5
Disassembly and Replacement
Note:
When taking off the control panel, check
the position of the stopper; if the stopper is
at the position "B", remove the stopper or
move it to the position "A".
[A]
Stopper
(1)
Slide the stopper and pull it out.
[B]
Control panel unit
(1)
Take off the front upper cover, right upper
cover-1 and right upper cover-2
(
P.2-29 "[E] Front upper cover",
"[F] Right upper cover-1",
Right upper cover-2").
(2)
Disconnect 1 connector.
(3)
Remove 2 screws and 2 harness clamps.
Then release 1 harness.
e-STUDIO200L/230/280 CONTROL PANEL
P.2-29
P.2-29 "[G]
5 - 16
B
A
Fig.5-9
Stopper
Fig.5-10
Fig.5-11
June 2004 © TOSHIBA TEC
Advertisement
Table of Contents
