Adjusting The Headlight Beam - Yamaha 2014 MT-07 Service Manual

4. Unhook:
• Headlight bulb holder "1"
5. Remove:
• Headlight bulb "2"
1
EWA13320
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
6. Install:
• Headlight bulb New
Secure the new headlight bulb with the head-
light bulb holder.
ECA13690
NOTICE
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
7. Hook:
• Headlight bulb holder
8. Install:
• Headlight bulb cover
9. Connect:
• Headlight coupler "1"
1
10.Install:
TIP
Fit the projections "a" on the headlight bracket
into the holes "b" in the headlight assembly.
2
11.Install:
TIP
When the headlight assembly bolts are tight-
ened to specification, there may be gaps "a" be-
tween the washers and the grommets as shown
in the illustration.
EAS30664

ADJUSTING THE HEADLIGHT BEAM

1. Adjust:
3-29
PERIODIC MAINTENANCE
• Headlight assembly "1"
1
b
• Headlight assembly bolts "1"
Headlight assembly bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
1
• Headlight beam (vertically)
1
a
a