Yamaha 2014 MT-07 Service Manual page 501

Removing the protective cap "1", and then connect the Yamaha diagnostic tool to the coupler.
Details about the displayed fault codes are shown in the following chart. Refer to this chart and check
the vehicle.
Once all the work is complete, delete the fault codes. [B-3]
TIP
Check the inspection points after terminating the connection with the Yamaha diagnostic tool and turn-
ing the main switch off.
Operation of the Yamaha diagnostic tool (Fault diagnosis mode)
Malfunction results are displayed in the top part of the window area.
3 4 5
2
Hydraulic unit assembly
1
Rear wheel sensor
1. Recovered
The item list of the malfunction detected in the past (already recovered) are displayed.
2. Detected
The item list of the malfunction currently occurred are displayed.
3. Code
The following icons and the fault code numbers for the detected malfunctions are displayed.
ABS (ANTI-LOCK BRAKE SYSTEM)
1
6 7
Detected Power is not supplied to the ABS motor.
Recovered Rear wheel sensor circuit is open or short-circuited.
8
8-96