Yamaha 2014 MT-07 Service Manual page 554

SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
Diagnostic
code No.
20 Sidestand switch
• Stand retracted
• Stand extended
21 Neutral switch and clutch
switch
• Transmission is in gear or
the clutch lever released
• Clutch lever is squeezed
with the transmission in
gear and when the side-
stand is retracted
• Clutch lever is squeezed
with the transmission in
gear and when the side-
stand is extended
60 EEPROM fault code display
• No history
• History exists
61 Malfunction history code dis-
play
• No history
• History exists
Item
ON
OFF
OFF
ON
OFF
00
• No malfunctions detected
(If the self-diagnosis fault
code 44 is indicated, the
ECU is defective.)
01–02 (Cylinder fault code)
• (If more than one cylinder
is defective, the display al-
ternates every two seconds
to show all the detected
cylinder numbers.
When all cylinder numbers
are shown, the display re-
peats the same process.)
11 (Data error for ISC (idle
speed control) learning val-
ues)
00
Fault codes 12–89
• (If more than one code
number is detected, the
display alternates every
two seconds to show all the
detected code numbers.
When all code numbers are
shown, the display repeats
the same process.)
Meter display
9-7
Procedure
Extend and retract the side-
stand (with the transmission
in gear).
Operate the transmission,
clutch lever, and sidestand.
—
—
—
—