Yamaha 2014 MT-07 Service Manual page 511

Fault code No.
Item
Symptom
Order Item/components and probable cause
3 Defective rear wheel sensor or hydraulic
unit assembly
Fault code No. 17, 45
TIP
If pulse gaps are detected when the vehicle is traveling at a speed of 30 km/h (19 mi/h) or more, fault
code No. 17 will be recorded. If the vehicle is traveling at a speed of 29 km/h (18 mi/h) or less, fault code
No. 45 will be recorded first and fault code No. 17 will be recorded if the condition continues.
Fault code No.
Item
Symptom
Order Item/components and probable cause
1 Foreign material adhered around the front
wheel sensor
2 Incorrect installation of the front wheel
3 Defective sensor rotor or incorrect instal-
lation of the rotor
4 Defective front wheel sensor or incorrect
installation of the sensor
Fault code No. 18, 46
TIP
If pulse gaps are detected when the vehicle is traveling at a speed of 30 km/h (19 mi/h) or more, fault
code No. 18 will be recorded. If the vehicle is traveling at a speed of 29 km/h (18 mi/h) or less, fault code
No. 46 will be recorded first and fault code No. 18 will be recorded if the condition continues.
ABS (ANTI-LOCK BRAKE SYSTEM)
16
Rear wheel sensor (open or short circuit)
Open or short circuit is detected in the rear wheel sensor.
Check or maintenance job
If the above items were performed and no malfunctions
were found, the wheel sensor or hydraulic unit assembly
is defective. Replace the wheel sensor or hydraulic unit
assembly.
Refer to "REAR WHEEL" on page 4-26 and "ABS (ANTI-
LOCK BRAKE SYSTEM)" on page 4-62.
17
45
Front wheel sensor (missing pulses)
Front wheel sensor signal is not received properly. (Missing pulses
are detected in the signal while the vehicle is traveling.)
Check or maintenance job
Check the surface of the sensor rotor and wheel sensor
for foreign material, such as metal particles.
Clean the sensor rotor and wheel sensor if necessary.
Check the components for looseness, distortion, and
bends.
Refer to "CHECKING THE FRONT WHEEL" on page
4-20.
Check the surface of the sensor rotor for damage.
Replace the sensor rotor if there is visible damage.
Refer to "MAINTENANCE OF THE FRONT WHEEL
SENSOR AND SENSOR ROTOR" on page 4-21.
Check the wheel sensor for damage and the installed
condition of the sensor. Repair or replace the wheel
sensor if necessary.
Refer to "MAINTENANCE OF THE FRONT WHEEL
SENSOR AND SENSOR ROTOR" on page 4-21.
8-106