Adjusting The Headlight Beam; Replacing The Headlight Bulb - Yamaha MBK MW125 2014 Service Manual

EAS30664

ADJUSTING THE HEADLIGHT BEAM

1. Adjust:
• Headlight beam (vertically)
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
a
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
2. Adjust:
• Headlight beam (horizontally)
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Turn the adjusting screws "1" in direction "a"
or "b".
Direction "a"
Headlight beam moves to the right.
Direction "b"
Headlight beam moves to the left.
b a
1
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS30665

REPLACING THE HEADLIGHT BULB

1. Disconnect:
• Headlight coupler "1"
2. Remove:
• Headlight bulb cover "2"
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
b a
b
1
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a
b
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
PERIODIC MAINTENANCE
▼▼▼
3. Remove:
• Headlight bulb holder "1"
• Headlight bulb
▲▲▲
EWA13320
WARNING
Since the headlight bulb gets extremely hot,
▼▼▼
keep flammable products and your hands
away from the bulb until it has cooled down.
4. Install:
• Headlight bulb
Secure the new headlight bulb with the head-
light bulb holder.
ECA13690
NOTICE
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
5. Install:
• Headlight bulb holder
▲▲▲
6. Install:
• Headlight bulb cover
7. Connect:
• Headlight coupler
3-25
1
2
1
New