Removing The Center Cover; Installing The Center Cover; Removing The Upper Tail Cover; Installing The Upper Tail Cover - Yamaha 2014 MT-07 Service Manual

EAS31094

REMOVING THE CENTER COVER

1. Remove:
• Center cover "1"
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Remove the center cover screws "2".
b. Unhook the projections "a" on the center cov-
er from the rear side covers.
a
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS31095

INSTALLING THE CENTER COVER

1. Install:
• Center cover "1"
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Fit the projections "a" on the center cover into
the holes "b" in the rear side covers, and then
tighten the center cover screws.
Center cover screw
1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)
1
a
b
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS31096

REMOVING THE UPPER TAIL COVER

1. Remove:
• Upper tail cover "1"
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Remove the upper tail cover screws "2".
b. Slide the upper tail cover rearward and re-
move it.
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
2
a
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a
b
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
▼▼▼
▲ ▲▲▲ ▲ ▲▲▲ ▲
1
EAS31097

INSTALLING THE UPPER TAIL COVER

1. Install:
• Upper tail cover "1"
▼ ▼▼▼ ▼ ▼▼▼ ▼
a. Fit the projections "a" on the upper tail cover
into the holes "b" in the rear side covers, and
▲▲▲
then slide the cover forward while fitting the
projection "c" on the tail/brake light assembly
into the slots "d" in the cover ribs. and then
slide the cover forward.
b. Tighten the upper tail cover screws.
▼▼▼
▲ ▲▲▲ ▲ ▲▲▲ ▲
EAS31098

REMOVING THE REAR SIDE COVERS

The following procedure applies to both of the
▲▲▲
rear side covers.
1. Remove:
• Rear side cover "1"
▼ ▼▼▼ ▼ ▼▼▼ ▼
a. Remove the fuel tank cover bolt "2", rear side
▼▼▼
cover bolts "3" and quick fasteners "4".
b. Pull the rear side cover off at the areas "a"
shown.
4-5
GENERAL CHASSIS (2)
1
2
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a
1
b
Upper tail cover screw
1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
▲ ▲▲▲ ▲ ▲▲▲
▼ ▼▼▼ ▼ ▼▼▼
d
a
c
b
▲ ▲▲▲ ▲ ▲▲▲
▼ ▼▼▼ ▼ ▼▼▼