Yamaha 2014 MT-07 Service Manual page 109

1. Air filter case
2. Fuel hose
3. Surge tank hose
4. Surge tank
5. Intake solenoid
6. Intake solenoid vacuum hose (one-way valve
to intake solenoid)
7. One-way valve
8. Intake solenoid vacuum hose (throttle body to
one-way valve)
9. Cylinder head breather hose
10. Intake solenoid vacuum hose (intake solenoid
to air filter case valve)
11. Air filter case valve
A. Face the yellow paint mark on the cylinder
head breather hose to the left. Install the
crankcase breather hose completely onto the
hose fitting.
B. Position the hose clamp 1–4 mm (0.04–0.16
in) from the end of the hose. Point the ends of
the hose clamp to the left.
C. Position the hose clamp 1–4 mm (0.04–0.16
in) from the end of the hose.
D. The 1XB2, 1XB7 and 1XB8 are not equipped
with an air duct.
2-64
CABLE ROUTING