Checking The Throttle Body Joints - Yamaha 2014 MT-07 Service Manual

A
1
B
A. Throttle body #1
B. Throttle body #2
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
2. Stop the engine and remove the measuring
equipment.
3. Connect:
• Intake air pressure sensor hose
• Intake solenoid vacuum hose (throttle body to
one way valve)
Refer to "THROTTLE BODIES" on page 7-9.
4. Install:
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
• Fuel tank front cover
• Fuel tank center cover
• Fuel tank cover (left)
• Fuel tank cover (right)
• Fuel tank top cover
Refer to "GENERAL CHASSIS (4)" on page
4-11.
• Rider seat
Refer to "GENERAL CHASSIS (1)" on page
4-1.
5. Adjust:
• Throttle grip free play
Refer to "CHECKING THE THROTTLE GRIP
OPERATION" on page 3-27.
Throttle grip free play
3.0–5.0 mm (0.12–0.20 in)
1
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
PERIODIC MAINTENANCE
EAS30798

CHECKING THE THROTTLE BODY JOINTS

1. Remove:
• Rider seat
Refer to "GENERAL CHASSIS (1)" on page
4-1.
• Fuel tank top cover
• Fuel tank cover (left)
• Fuel tank cover (right)
• Fuel tank center cover
• Fuel tank front cover
Refer to "GENERAL CHASSIS (4)" on page
4-11.
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
2. Disconnect:
• Intake solenoid vacuum hose (throttle body to
one way valve)
• Intake air pressure sensor hose
Refer to "THROTTLE BODIES" on page 7-9.
3. Remove:
• Throttle bodies
Refer to "THROTTLE BODIES" on page 7-9.
4. Check:
• Throttle body joints
▲▲▲
Cracks/damage → Replace.
5. Install:
• Throttle bodies
Refer to "THROTTLE BODIES" on page 7-9.
6. Connect:
• Intake solenoid vacuum hose (throttle body to
one way valve)
• Intake air pressure sensor hose
Refer to "THROTTLE BODIES" on page 7-9.
7. Install:
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
• Fuel tank front cover
• Fuel tank center cover
• Fuel tank cover (left)
• Fuel tank cover (right)
• Fuel tank top cover
Refer to "GENERAL CHASSIS (4)" on page
4-11.
• Rider seat
Refer to "GENERAL CHASSIS (1)" on page
4-1.
3-10