Yamaha 2014 MT-07 Service Manual page 97

1. Battery band
2. Wire harness
3. Positive battery lead
4. Negative battery lead
5. Fuse box 1
6. Fuse box 2
7. Lean angle sensor
8. Rear turn signal light lead (left turn signal
light)
9. Rear turn signal light lead (right turn signal
light)
10. License plate light lead
11. Tail/brake light assembly lead
12. Battery
13. Battery box
14. Seat lock cable
A. Route the rear left turn signal light lead, rear
right turn signal light lead, and license plate
light lead through the hole in the frame.
B. Install fuse box 1 completely onto the tab on
the battery box.
C. Route the seat lock cable through the guide
on the battery box.
D. Install fuse box 2 completely onto the tab on
the battery box.
E. Route the tail/brake light assembly lead, rear
turn signal light leads, and license plate light
lead through the hole in the battery box. The
leads may be routed in any order.
F. Fasten the tail/brake light assembly lead, rear
turn signal light leads, and license plate light
lead with the holder. The leads may be
fastened in any order.
2-52
CABLE ROUTING