7. Check:
• Bearing
• Oil seal
Damage/wear → Replace the starter motor
front cover.
EAS30326
ASSEMBLING THE STARTER MOTOR
1. Install:
• Lead guide "1"
TIP
Make sure that the slot "a" in the lead guide is
facing in the direction shown in the illustration.
a
2. Install:
• Starter motor yoke "1"
• Starter motor front cover "2"
• Starter motor rear cover "3"
TIP
Align the match marks "a" on the starter motor
yoke with the match marks "b" on the front cover
and rear covers.
b
3
EAS30327
INSTALLING THE STARTER MOTOR
1. Install:
• Coupler and hose holder bracket "1"
TIP
Make sure that the tab "a" on the coupler and
hose holder bracket contacts the projection "b"
on the cylinder block.
1
a
b
1
2
ELECTRIC STARTER
5-49
1
b
a