Removing The Lower Triple Clamp; Installing The Lower Triple Clamp - KTM 250 SX 2024 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.13
11.14
54

Removing the lower triple clamp

S05332-10
S05333-10

Installing the lower triple clamp

F03661-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs. (
–
Remove the start number plate. (
–
Remove front fender. (
–
Take off the handlebar cushion.
Main work
–
1
Remove screw . Detach the wiring harness.
–
2
Remove screw .
–
3
Remove screw .
–
Take off the upper triple clamp with the handlebar and place
to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove the steering head seal
–
Remove the lower triple clamp with steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Push on steering head seal
p. 48)
( p. 94)
p. 52)
p. 58)
p. 58)
4
.
p. 140)
1
.