Removing The Lower Triple Clamp - KTM 125 SX 2024 Owner's Manual

11.9

Removing the lower triple clamp

–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws .
S05330-11
Finishing work
–
Install the front wheel.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove front fender. (
–
Take off the handlebar cushion.
Main work
–
Remove screw
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and place
to one side.
Info
Cover the components to protect them against damage.
S05332-10
Do not kink the cables or lines.
–
Remove steering head seal
–
Remove the lower triple clamp with steering stem.
–
Remove the upper steering head bearing.
S05333-10
SERVICE WORK ON THE CHASSIS 11
M8 25 Nm (18.4 lbf ft)
( p. 96)
( p. 95)
( p. 51)
p. 57)
p. 58)
1
. Detach the wiring harness.
2
.
3
.
4
.
4
.
Loctite ® 243™
p. 49)
53